• Filling machine
  • Barrel filling line (3-10L)
  • Juice beverage production line
  • Gas Contain beverage production line
  • Beverage prepare&sterilizer system
  • Water treatment system
  • Packaging system
  • Blow molding machine&injection...
  • Assistant facility
  • Edile oil filling and capping 2-in-1 unit machine

    Zhangjiagang City Tango Machinery City Co,Ltd
    Add:Zhangjiagang City ,Jinfeng town,industrial park
    Contact:Sophie Zhong 

    opp hot glue label sticking machine

    OPP hot glue label sticking machine

    OPP hot glue label sticking machine
    Product name:OPP hot glue label sticking machine
    Category:opp hot glue label sticking machine
    Updated:2016/11/10 13:53:19


                                                     OPP hot glue label sticking machine

    1. Name: hot glue opp label sticking machine  

    Model :JL-04 series

    Label sticking method: round label sticking   

    Usage glue type: hot glue   

     1.1).label cutting knife adjust easy  

    1.2).vacuum absorb wheel adopt to high hardness material making, add shrink treatment programme to cut label abrasion, avoid statics produce.

    1.3).exchange compatible workin can do at 10minute quickly finish.

    1.4). Can use manual manipulation precision and convenient to adjust knife plate site.

    1.5). Vacuum absorb wheel and label cutting part adopt to abrasion heat special matrial making.  

    1.6).when change label length, auto adjust button can auto adjust I-MARK position

    2. Usage label

    ① label material:OPP(gear type)

    ②label specification: as client requirement

    ③ label sticking method: linear type hot glue sticking label

    3. Facility description

    3.1) adopt to wheel stick label method  

    3.2) via label roll transport label via label wheel supply,as guid rail to do label sticking operation.  

    3.3) label via label supply wheel, transit auto test I-MARK

    3.4) once sure electrici eye position, modem auto adjust wheel supply operation speed, can no mistake cutting label position.

    3.5) label via label supply gear, into cutting part to do cutting operation, then cutting label transport to vacuum absorb plate

    3.6)  via conveyor belt transport container to wheel gear to do arrange, after glue spray label, to do guid first time label sticking, then rely on in-phase operation to do perfect label sticking operation.  

    4. Device descripton:  

    4.1) controlling: operation controling,frequency convertor  

    4.2) safe device

    ① drive part set overload operation protection device  

    ② supply wheel gear abnormal statics stop device

    ③ no bottle supply inspection device

    ④ bottle supply overload inspection device  


    5. Main fracture


    5.2) supply star wheel

    5.3) label station

    5.4) vacuum absorb plate

    5.5) drive part

    5.6)hot glue glue supply machine

    5.7)glue roller wheel

    5.8)in phase belt

    5.9) label cutting part

    5.10) label guid rectify

    5.11)machine frame

    5.12) vacuum system and air source treatment
    5.13) controlling system

    6. Compatible part  

    6.1) wheel gear and guard board  

    6.2) cavcuum absorb plate  

    6.3)screw pusher  

    6.4) rub bottle guard board

    2.  Machine chart                                                                             

    1. Label plate   2 pull and transit  3 cutting knife anf transit  4. Label correct rotate drum  5.glue spray roller

    6.rub label fracture   7.thumble bottle wheel  8. Bottle entry screw  9. Main machine conveyor section. Machine frame

    ◆ Pull and transit-via motor pull roller, via screw thread compressor roller pull roller, label via comrpessor strength roller and pull roller middle cross, via controlling system servo motor rotate, reach pull and controlling label length aim.this fracture label supply steadily.◆ Cutting knife and transit-adopt to single knife fracture, via vaccum bump function,absorb viapull transit label, rotate to cutting knife to cut off, and have compressor air let label ,back assistant blow, then cutting knife smoothly transit to label sticking drum. Then fracture part strongly and enduration, cutting vibrate alittle noise,long small knife life.   

      label spray and hot glue machine-when working cylinder push label spray fracture let label spray roller and label rotate drum cutting and sticking, and same time glue machine let glue melt to requirement statics and temperature, constant pressure-evenly supply label spray fracture, glue spray roller, via glue roller method let glue evenly sitck at label two head,. This ftracture label spray evenly, save glue.


     Facility main parameter  

    Facility name

    Automatic linear hot glue opp label sticking machine  

    Machine model


    Main motor power


    Main motor brand

    Taiwan brand



    Servo motor

    Schneider 1.5KW

    PLC module



    SICK  Schneider  Panasonic



    Low pressure electricity




    Frequency convertor


    Whole machine power

    About 8KW

    Label type

    Single round body label  

    Applied bottle type

    Round bottle ∮40-105mm,height=80-350MM

    Label size

    Length 125-325mm,height 20-150mm

    Label spray method

    Roller coating(label head and end end about each 10mm)

    Label usage method

    Roll label


    12000b/h (common 500ml bottle type)  



    Compressor air pressure

    MIN5.0bar  MAX8.0bar

    Compressor air consumption quantity


    Whole machine weight

    About 2000kg

    Machine overall size

    L=3150  W=1570  H=1800